Scrap Metal Shredder Machine clogging solution:
During the use of the metal shredder, because some users are not familiar with the improper operation of the metal shredder, it is prone to blockage of the metal shredder. In order to enable all metal shredder users to easily operate the metal shredder, the editor will introduce how to solve the problem of metal shredder blockage.
1. The unreasonable design of the discharging port causes poor discharging or fast feeding, which will block the tuyere of the grinder; improper matching with the conveying equipment will cause the discharging pipe to be blocked when the wind is weakened or there is no wind. After the fault is detected, the unmatched conveying equipment should be cleared first, and the feeding amount should be adjusted to make the equipment operate normally.
2. Hammer fragments, aging, closed screen holes, broken, and high water content of the crushed materials will block the crusher. The broken and severely aged hammers should be updated regularly, the metal crusher should be kept in good working condition, and the screen should be checked regularly. The water content of the crushed material should be less than 14%, which can improve the production efficiency and prevent the crusher from clogging. , Enhance the reliability of the crusher's work.
3. The staff should clean up the machine before getting on and off the machine, so that the machine can work in the best condition every day to prevent clogging
